2021 Good Quality Permalloy Alloy - Stellite Alloy 6/ 6B/12 Bar/ Welding Wire – Sekonic

Stellite alloys are mostly cobalt based with additions of Cr, C, W, and/or Mo. They are resistant to cavitation, corrosion, erosion, abrasion, and galling. The lower carbon allovs are generally recommended for cavitation, sliding wear, or moderate gallina. The higher carbon alloys are usually selected for abrasion, severe galling, or low- angle erosion Stellite 6 is our most popular alloy as it provides a good balance of all of these properties.

The Stellite alloys retain their properties at high temperatures where they also have excellent oxidation resistance. They are typically used in the temperature range 315-600° C (600-1112 F). They can be finished to exceptional levels of surface finish with a low coefficient of friction to give good sliding wear.

Stellite Alloy Available Products in Sekonic Metals

Stellite 6/6B/12 Welding Wire

Supply Stellite 6/6B/12 welding wire  in coil form and cut length Form

Stellite 6B/12 Bars & Rods

Forging Round bar and casting round bar both can be produced by us as per AMS5894

Stellite 6/6B /12Ring & Sleeve

Valve seat ring, casting sleeve can be produces as clients specification

Stellite Alloy Processing :

Usually use cemented carbide tools to process 6B, and the surface accuracy is 200-300RMS. Alloy tools need to use 5° (0.9rad.) negative rake angle and 30° (0.52Rad) or 45° (0.79rad) lead angle. 6B alloy is not suitable for high-speed tapping and EDM processing is used. In order to improve the surface finish, grinding can be used to achieve high precision. Can not be quenched after dry grinding, otherwise it will affect the appearance

Stellite Alloy Application field：

Stellite can be used to manufacture valve parts, pump plungers, steam engine anti-corrosion covers, high temperature bearings, valve stems, food processing equipment, needle valves, hot extrusion molds, forming abrasives, etc.