Chinese Professional Nickel Welding Wire - GH3030 XH78T Sheet/Plate/ Bar/Wire – Sekonic
Chinese Professional Nickel Welding Wire - GH3030 XH78T Sheet/Plate/ Bar/Wire – Sekonic Detail:
Common Trade Names: GH3030，GH30 ,Зи435，XH78T
GH3030 solid solution reinforced superalloy is an early 80Ni-20Cr solid solution strengthened superalloy. It has simple chemical composition, satisfactory thermal strength and high plasticity below 800℃, and good oxidation resistance, thermal fatigue, cold stamping and welding process properties.
After solution treatment, the alloy is single phase austenite, and the structure is stable during use.
Turbine engine combustor components to be used for work below 800℃ and other high-temperature components that require oxidation resistance but bear little load below 1100℃.
GH3030 has strong performance of hot processing waste cold processing, used for making various chemical equipment and accessories.
GH3030 Chemical Composition
| Alloy |
% |
Fe |
Cr |
Ni |
C |
Mn |
Si |
S |
P |
Al |
Ti |
|
GH3030 |
Min. |
- |
19 |
balance |
- | - | - | - | - | - | 0.15 |
|
Max. |
1.5 |
22 |
0.12 | 0.7 | 0.8 | 0.02 | 0.03 | 0.15 | 0.35 |
GH3030 Physical Properties
| Density | 8.4 g/cm³ |
| Melting point | 1374-1420 ℃ |
GH3030 Mechanical Properties
| Status |
Tensile strength Rm N/mm² |
Yield strength Rp 0. 2N/mm² |
Elongation As % |
Brinell hardness HB |
| Solution treatment | 785 | - | 35 | - |
GH3030 Available Products in Sekonic Metals
GH3030 bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
GH3030 Forging Ring
Forging Ring or gasket,size can be customized with bright surface and precision tolerance
GH3030 sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
GH3030 seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
GH3030 strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
GH3030 Fasteners
GH3030 materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why GH3030 ?
• Solid solution reinforced superalloy, simple chemical composition,
• It has satisfactory thermal strength and high plasticity below 800 ℃.
• And has good oxidation resistance, thermal fatigue, cold stamping and welding process properties.
• After solution treatment, the alloy is single phase austenite, and the structure is stable during use.
GH3030 Application field：
The alloy has been used in aero-engine for a long time, and is mainly used in combustor and afterburner parts as well as casing mounting edge parts
Product detail pictures:
Related Product Guide:
Special Materials we offer
Why Nickel Based Alloys ?
Good quality comes initial; company is foremost; small business is cooperation" is our business philosophy which is frequently observed and pursued by our business for Chinese Professional Nickel Welding Wire - GH3030 XH78T Sheet/Plate/ Bar/Wire – Sekonic , The product will supply to all over the world, such as: Bangladesh, The Swiss, Swedish, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Jill from Turkey - 2017.09.29 11:19
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Sally from British - 2018.06.26 19:27
