Free sample for Inconel 601 Plate - Stainless steel 17-7PH – Sekonic
Free sample for Inconel 601 Plate - Stainless steel 17-7PH – Sekonic Detail:
Common Trade Names: 17-7PH,SUS631,S17700,07Cr17Ni7Al,W.Nr.1.4568
17-7PH is austenitic-martensitic precipitation hardening stainless steel developed on the basis of 18-8CrNi, also known as controlled phase change stainless steel.At the solution treating temperature, 1900°F, the metal is austenitic but undergoes transformation to a low-carbon martensitic structure during cooling to room temperature. This transformation is not complete until the temperature drops to 90°F. Subsequent heating to temperatures of 900-1150°F for one to four hours precipitation strengthens the alloy. This hardening treatment also tempers the martensitic structure, increasing ductility and toughness
17-7PH Chemical Composition
| C | Cr | Ni | Si | Mn | P | S | Al |
| ≤0.09 | 16.0-18.0 | 6.5-7.75 | ≤1.0 | ≤1.0 | ≤0.04 | ≤0.03 | 0.75-1.5 |
17-7PH Physical Properties
| Density (g/cm3) | Melting point（℃） |
| 7.65 | 1415-1450 |
17-7PH Mechanical Properties
| Condition | бb/N/mm2 | б0.2/N/mm2 | δ5/% | ψ | HRW | |
| Solution treatment | ≤1030 | ≤380 | 20 | － | ≤229 | |
| Precipitationhardening | 510℃ageing | 1230 | 1030 | 4 | 10 | ≥383 |
| 565℃ageing | 1140 | 960 | 5 | 25 | ≥363 | |
17-7PH Standards and Specifications
AMS 5604, AMS 5643, AMS 5825,ASME SA 564, ASME SA 693, ASME SA 705, ASME Type 630,ASTM A 564, ASTM A 693, ASTM A 705, ASTM Type 630
Condition A – H1150,ISO 15156-3,NACE MR0175,S17400,UNS S17400,W. Nr./EN 1.4548
| Bar/Rod | Wire | Strip/Coil | Sheet/Plate | Pipe/Tube |
17-7PH Available Products in Sekonic Metals
17-7PH Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
17-7PH Wire
Supply in welding wire and spring wire in coil form and cut length.
17-7PH sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
17-7PH seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
17-7PH strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
17-7PH Fasteners
17-7PH materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why 17-7 PH?
• High tensile strength and hardness to 600°F
• Corrosion resistant
• Excellent oxidation resistance to about 1100°F
• Creep-rupture strength to 900°F
17-7 PHApplication field：
• Gate valves
• Chemical processing equipment
• Pump shafts, gears, plungers
• Valve stems, balls, bushings, seats
• Fasteners
Product detail pictures:
Related Product Guide:
Why Nickel Based Alloys ?
electropolished
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Free sample for Inconel 601 Plate - Stainless steel 17-7PH – Sekonic , The product will supply to all over the world, such as: Belgium, New Zealand, Japan, We believe that good business relationships will lead to mutual benefits and improvement for both parties. We have established long-term and successful cooperative relationships with many customers through their confidence in our customized services and integrity in doing business. We also enjoy a high reputation through our good performance. Better performance will be expected as our principle of integrity. Devotion and Steadiness will remain as ever.
By Doris from Guatemala - 2017.10.27 12:12
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Marian from Azerbaijan - 2017.10.23 10:29
