Good Quality Nickel Alloy - Inconel 625 Disc Ring/ Joint ring/ Washer/gasket – Sekonic
Good Quality Nickel Alloy - Inconel 625 Disc Ring/ Joint ring/ Washer/gasket – Sekonic Detail:
Inconel 625 Disc Ring/ Washer/ Gasket/ Joint Ring
♦ Material: Inconel 625(UNSNO6625)
♦ Size:M6-M36 or as per clients requirements
♦ OD 15.5-66.0mm ID:8.4-37.0mm
♦ Thickness:1.4mm-5.6mm or as per clients requiriments
♦ Application ：Aero-engine parts and Aerospace structural parts
♦ Other Meaterials : Inconel 718, Inconel x750 ect
Inconel Alloy 625 is a non-magnetic, corrosion and oxidation resistant, nickel-chromium alloy. The high strength of Inconel 625 is the result of the stiffening combination of molybdenum and niobium on the nickel chromium base of the alloy. Inconel 625 has tremendous resistance to a wide range of unusually severe corrosive environments including high-temperature effects such as oxidation and carburization. Its outstanding strength and toughness in temperature ranges from cryogenic temperatures to high temperature up to 2000° F (1093° C) are derived primarily from the solid solution effects of the refractory metals Columbium and molybdenum in a nickel-chromium matrix.Common applications for this alloy are springs, seals, bellows for submerged controls, electrical cable connectors, fasteners, flexure devices, and oceanographic instrument components.
Inconel 625 Chemical Composition
|
% |
Ni |
Cr |
Fe |
Mo |
Nb+Ta |
Co |
C |
Mn |
Si |
S |
Al |
Ti |
P |
|
Min. |
58.0 |
20.0 |
- |
8.0 |
3.15 |
- | - | - | - | - |
- |
- | - |
|
Max. |
- |
23.0 |
5.0 |
10.0 |
4.15 |
1.0 |
0.1 |
0.5 |
0.5 |
0.015 |
0.4 |
0.4 |
0.015 |
Inconel 625 Physical Properties
| Density | 8.4 g/cm³ |
| Melting point |
1290-1350 ℃
|
Inconel 625 Alloy minimum mechanical properties in the roomtemperature
| Status |
Tensile strength Rm N/mm² |
Yield strength Rp 0. 2N/mm² |
Elongation As % |
Brinell hardness HB |
| Solution treatment | 827 | 414 | 30 | ≤220 |
Inconel 625 Available Products in Sekonic Metals
Inconel 625 Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Inconel 625 welding wire
Supply in welding wire and spring wire in coil form and cut length.
Inconel 625 sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Inconel 625 seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
Inconel 625 strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Inconel 625 Fasteners
Alloy 625 we can offer bolts,Nuts and other fasteners as clients requirements
Inconel 625 Features :
1.High creep-rupture strength
2.Oxidation resistant to 1800°F
3.Good fatigue resistance
4.Excellent weldability
5.Outstanding resistance to chloride pitting and crevice corrosion
6.Immune to chloride ion stress corrosion cracking
7.Resistant to seawater under both flowing and stagnant conditions and under fouling
Inconel 625 Application field：
• Aircraft ducting systems
• Jet engine exhaust systems
• Engine thrust-reverser systems
• Bellows and expansion joints
• Turbine shroud rings
• Flare stacks
• Seawater components
• Chemical process equipment handling mixed acids both oxidizing and reducing.
Our company Products Forms
Bars & Rods
Inconel / Hastelloy/ Monel/ Haynes 25/ Titanium
Seamless Tube & Welded Tube
Nickel/ Titanium Alloy tubes, U-bend /heat exchange tube
Bolt & Nuts
Inconel 601/ Hastelloy C22/Inconel x750/Inconel 625 ect
Sheet & Plates
Hastelloy/Inconel/ Incoloy/ Cobalt/Tianium
Strip & Foil
Hastelloy/Inconel/ invar/ soft magnetic Alloys ect
High Temperature Springs
Inconel 718/Inconel x750/ Nimonic 80A
Wire & Welding
Cobalt Alloy wire, Nickel alloy wire,Tianium Alloy wire
Special Alloy Flanges
Monel 400/ Hastelloy C276/ Inconel 718/ Titanium
Oil Tube Hanger
Inconel x750/ Inconel 718 /Monel 400 ect
Nickel Based Alloys
Welding Materials
Cobalt Based Alloys
Special Stainless Steels
Precision Alloys
Titanium Alloys
Want to Learn More or get a quote ?
Product detail pictures:
Related Product Guide:
electropolished
Special Materials we offer
Our enterprise aims to operating faithfully, serving to all of our prospects , and working in new technology and new machine frequently for Good Quality Nickel Alloy - Inconel 625 Disc Ring/ Joint ring/ Washer/gasket – Sekonic , The product will supply to all over the world, such as: Uruguay, Thailand, Kenya, To let customers be more confident in us and get the most comfortable service, we run our company with honesty, sincerity and best quality . We firmly believe that it is our pleasure to help customers to run their business more successfully, and that our professional advice and service can lead to more suitable choice for the customers.
By Christina from United Arab Emirates - 2018.09.21 11:01
The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
By mary rash from Jamaica - 2017.06.22 12:49
