High Quality for Alloy 188 Bar - Stellite 6/ Stellite 6B/ Stellite 12 valves seat Ring/ Sleeve – Sekonic

Product Detail

we are able to provide good quality items, aggressive rate and best shopper assistance. Our destination is "You come here with difficulty and we provide you with a smile to take away" for R26 bolt, Soft magentic shelding sheet, 15-5PH steel bar, Our clients mainly distributed in the North America, Africa and Eastern Europe. we can supply high quality products with the very competitive price.

High Quality for Alloy 188 Bar - Stellite 6/ Stellite 6B/ Stellite 12 valves seat Ring/ Sleeve – Sekonic Detail:

stellite 6B ring, seat ring,valve seat ring

Stellite 6/6B Valves Seat Ring/ Sleeve

♦ Material: Stellite Alloys, Stellite 6, Stellite 6B, Stellite 12

♦ Forms: Ring, Sleeve as per clients drawing or specification

♦ Surface: Polished/ Grinding

♦ Tolerance:+/-0.01 mm On OD and ID

♦ Hardness: 38-55 HRC

♦ Standards :AMS 5387 ect

Stellite 6 or cobalt 6 cobalt based alloys produced by centrifugal casting or sand moulding, used in bushings and wear rings to improve wear resistance.

Condition: Casting, stress relief before processing

Heat treatment: stress relief: heat the casting to the minimum 800℃, hold for 1-4 hours slow cooling.

Process: All castings of the same batch shall be of the same quality without pores, pores, hard spots, shrinkage defects, cracks or other harmful defects.Single castings with isolation holes below 0.5 mm are not allowed to be repaired, plugged or welded.

Semi-finished castings for EMS final machining shall be provided in “Machining Inspection Status” to allow casting to be inspected prior to shipment.

stellite 6b ring, stellite sleeve

Stellite Alloys Chemical compositions and properties (%)

Material	C	Mn	Si	Cr	Ni	Mo	W	Co	Fe	P	S	Density(g/cm3)	Hardness(HRC)
Stellite 3	2.0-2.7	1.0	1.0	29-33	3.0		11-14	Bal.	3.0	≤0.03	≤0.03	8.55	51-55
Stellite 6	0.9-1.4	1.0	1.5	27-31	3.0	1.5	3.5-5.5	Bal.	3.0	≤0.03	≤0.03	8.35	38-44
Stellite 12	1.1-1.7	1.0	1.0	28-32	3.0		7.0-9.5	Bal.	3.0	≤0.03	≤0.03	8.40	44-49

Application:

Stellite6B alloy is one of the cobalt-based wear resistant Bai alloys, wear resistance and toughness, can adapt to most conditions, a wide range of applications, hardness in 37-45HRC;It is mainly used for chemical wear-resisting plate, wear-resisting rod, steam chemical valve seat, steam turbine blade protection, anti-erosion bushing, hot dip galvanized submerged roller and other parts;Compared with WR6 (Stellite6) WR6B, WR6B has better high temperature wear resistance

Product detail pictures:

Related Product Guide:
Why Cobalt based Alloys
electropolished

"Based on domestic market and expand overseas business" is our development strategy for High Quality for Alloy 188 Bar - Stellite 6/ Stellite 6B/ Stellite 12 valves seat Ring/ Sleeve – Sekonic , The product will supply to all over the world, such as: Burundi, Montreal, Slovak Republic, Our company has abundant strength and possesses a steady and perfect sales network system. We wish we could establish sound business relationships with all customers from at home and abroad on the basis of mutual benefits.

Alloy 188 bar

Alloy 218

Alloy 31

Alloy 400 Bar

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.