Popular Design for Monel Bar - Stainless Steel 904 / 904L – Sekonic

Product Detail

We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for Slide Block, Monel K500 PIPE, Cobalt alloy welding electrode, Our intention is to assist clients understand their ambitions. We are earning wonderful attempts to realize this win-win predicament and sincerely welcome you to be a part of us.
Popular Design for Monel Bar - Stainless Steel 904 / 904L – Sekonic Detail:

Common Trade Names: Alloy 904L , N08904 , W.Nr 1.4539 , N08904 , Cr20Ni25Mo4.5Cu

904L is a  Super Austenstic Stainless Steel with low carbon content. The grade is intended for use under severe corrosive conditions. It has been application proved over many years and was originally developed to resist corrosion in dilute sulfuric acid. It is standardized and approved for pressure vessel use in several countries. Structurally, 904L is fully austenitic and is less sensitive to precipitation ferrite and sigma phases than conventional austenitic grades with high molybdenum content. Characteristically, due to the combination of relatively high contents of chromium, nickel, molybdenum and copper 904L has good resistance to general corrosion, particularly in sulfuric and phosphoric conditions.

Alloy 904L Chemical Composition

C Cr Ni Mo Si Mn P S Cu N
≤0.02 19.0-23.0 23.0-28.0 4.0-5.0 ≤1.0 ≤2.0 ≤0.045 ≤0.035 1.0-2.0 ≤1.0

Alloy 904L Physical Properties

Density
(g/cm3
Melting point
(℃)
Elastic modulus
(GPa)
Thermal expansion coefficient
(10-6-1)
Thermal conductivity
(W/m℃)
Electric resistivity
(μΩm)
8.0 1300-1390 195 15.8 12 1.0

Alloy 904L Mechanical Properties

  Temperature
(℃)
бb(N/mm2 б0.2(N/mm2 δ5(%) HRB
Room temperature ≤490 ≤220 ≥35 ≤90

Alloy 904L  Standards and Specifications

ASME SB-625, ASME SB-649, ASME SB-673, ASME SB-674, ASME SB-677

Alloy 904L Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

Alloy 904L Bars & Rods

Round bars/Flat bars/Hex bars,     Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

Alloy 904L Wire

Supply in welding wire and spring wire in coil form and cut length.

Sheet & Plate

Alloy 904L sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.


nickel-tube

Alloy 904L seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

inconel strip,invar stirp,kovar stirp

Alloy 904L strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Fasterner & Other Fitting

Alloy 904L Fasteners

Alloy 904L  materials  in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Why Alloy 904L ?

Good resistance to pitting corrosion and crevice corrosion

High resistance to stress corrosion cracking, intergranular, good machinability and weldability

In all the various kinds of phosphates904L alloy corrosion resistance is superior to the ordinary stainless steel.

In strong oxidizing nitric acid, compared to high alloy without molybdenum steel grade, 904Lshows lower corrosion resistance.

This alloy has better corrosion resistance than the conventional stainless steel .

Reduce the corrosion rate of the pit and gaps for the high content of nickel, and have good resistance to stress corrosion cracking, in the environment of chloride solution, concentration of hydroxide solution and rich hydrogen sulphide.

Alloy 904L Application field:

Petroleum and petrochemical equipment,such as reactor of petrochemical equipment, etc.

Sulfuric acid storage and transportation equipment, such as heat exchangers, etc.

Power plant flue gas desulfurization devicen,Main parts of use:the absorber tower body, flue,internal parts, spray system, etc

Organic acid scrubber and the fan in the processing system.

Water treatment plant, water heat exchanger, papermaking equipment,sulfuric acid, nitric acid equipment, acid,

Pharmaceutical industry and other chemical equipment, pressure vessel, food equipment.

Pharmaceutical: centrifuge, reactor, etc.

Plant foods: soy sauce pot, cooking wine, salt, equipment and dressings.

To dilute sulphuric acid strong corrosive medium steel 904 l is matching.


Product detail pictures:

Popular Design for Monel Bar - Stainless Steel 904 / 904L  – Sekonic detail pictures


Related Product Guide:
Special Materials we offer
Why Cobalt based Alloys

To continuously increase the administration process by virtue of the rule of "sincerely, good religion and excellent are the base of company development", we commonly absorb the essence of linked goods internationally, and continually build new solutions to fulfill the requires of shoppers for Popular Design for Monel Bar - Stainless Steel 904 / 904L – Sekonic , The product will supply to all over the world, such as: Birmingham, Nepal, Ghana, Our solutions have national accreditation requirements for qualified, good quality products, affordable value, was welcomed by individuals all over the world. Our products will continue to improve inside the order and appear forward to cooperation with you, Definitely should any of those goods be of curiosity to you, be sure to letus know. We'll be satisfied to supply you a quotation up on receipt of the detailed needs.
  • This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Rose from Sudan - 2018.06.05 13:10
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By Marguerite from Hungary - 2018.11.28 16:25
    Write your message here and send it to us