Nickel welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire

Product Detail

Nickel welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire,
AWS A5.14 ErNiCu7, Monel 400/K500 Nickel Welding, nickel welding wire,
/haynes-25-alloy-l605-co350-welding-wire-product/

ErNicu-7 (Monel 400/K500)Welding Wire

♦ Welding Material Name: Nickel welding Wire, ErNiCu-7, Monel 400/K500 Welding Wire

♦ MOQ:15kg

♦ Form: MIG(15kgs/spool), TIG(5kgs/box)

♦ Size: Diameter 0.01mm-8.0mm

♦ Common  Size: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM

♦ Standards: Conforms to Certification AWS A5.14 ASME SFA A5.14


Contact Us to Learn More !

ErNiCu-7 Based Material is Monel 400 and Monel K500, This welding wire is mainly used for welding MONEL400 alloy, MONELR404 alloy and MOENLK-500 alloy by tungsten inert-gas welding, MGW and submerged arc welding, and can also be used for surfacing steel surface welding by MGW and submerged arc welding.

It is recommended to use the Erni-1 nickel wire cover for specific gas welding conditions.

ERNiCu-7 Chemical Composition

C

Al

Ni

Si

Mn

P

S

Fe

Cu

Ti

Other

 ≤0.15

≤1.25  62.0-69.0  ≤1.25 ≤4.0 ≤0.02 ≤0.015 ≤2.5 Bal 1.5-3.0 ≤0.50

 

 

ERNiCu-7 Typical Welding Parameters

Diameter Process Volt Amps Shielding Gas
In mm
0.035 0.9 GMAW 26-29 150-190 75%Argon+25%Helium
0.045 1.2 GMAW 28-32 180-220 75%Argon+25%Helium
1/16 1.6 GMAW 29-33 200-250 75%Argon+25%Helium
0.035 0.9 GTAW 12-15 60-90 100% Argon
0.045 1.2 GTAW 13-16 80-110 100% Argon
1/16 1.6 GTAW 14-18 90-130 100% Argon
3/32 2.4 GTAW 15-20 120-175 100% Argon
1/8 3.2 GTAW 15-20 150-220 100% Argon
3/32 2.4 SAW 28-30 275-350 Suitable flux may he usedi
1/8 3.2 SAW 29-32 350-450 Suitable flux may he usedi
5/32 4.0 SAW 30-33 400-550 Suitable flux may he usedi

ERNiCu-7 Mechanical Properties

Condition Tensile Strength MPa (ksi) Yield Strength MPa (ksi)  Elongation%
AWS reauirement 480(70) Typical Not specified Not specified
Typical results as welded 530(77) 360(53) 34

Why ERNiCu-7?

No Preheat required, maximum interpass temperature 150℃ and no PwHT required
Dissimilar welding applications include joining alloys to Nickel 200 and copper-nickel alloys-
Widely used in marine applications because of its good resistance to the corrosive effects of seawater and brackish waters
Can be used for MIG overlay on steel after a first layer with nickel 208

MOQ:15kg
Form: MIG(15kgs/spool), TIG(5kgs/box)
Size: Diameter 0.01mm-8.0mmCommon Size:0.8MM/1.0MM/1.2MM/1.6MM/2.4MM/3.2MM/3.8MM/4.0MM/5.0MM
Standards: Conforms to Certification AWS A5.14 ASME SFA A5.14


  • Previous:
  • Next:

  • Write your message here and send it to us