OEM Supply Inconel 601 Sheet - Stainless Steel 15-5ph – Sekonic

Product Detail

The key to our success is "Good Product Quality, Reasonable Value and Efficient Service" for Nitronic 60 rod, 1J79 BAR, Alloy 31 tube, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!

OEM Supply Inconel 601 Sheet - Stainless Steel 15-5ph – Sekonic Detail:

Common Trade Names: 15-5, 15-5PH, UNS 15500 , XM-12 , W.Nr 1.4545

15-5pH steel alloy was designed to have greater toughness than 17-4 PH. The 15-5 alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. 15-5 is also referred to as XM-12 in some specifications

Steel 15-5PH (Xm-12) Chemical Composition

C	Cr	Ni	Si	Mn	P	S	Cu	Nb
≤0.07	14.0-15.5	3.5-5.5	≤1.0	≤1.0	≤0.04	≤0.03	2.5-4.5	0.15-0.45

Steel 15-5PH (Xm-12) Physical Properties

Density (g/cm³)	Electric resistivity (μΩ·cm)	Heat specific capacity (J·kg^-1·K^-1)	Thermal expansion coefficient (0-100℃)
7.8	0.98	460	10.8

Steel 15-5PH (Xm-12) Mechanical Properties

Condition		бb/N/mm²	б0.2/N/mm²	δ5/%	ψ	HRC
Precipitation hardened	480℃ageing	1310	1180	10	35	≥40
	550℃ageing	1070	1000	12	45	≥35
	580℃ageing	1000	865	13	45	≥31
	620℃ageing	930	725	16	50	≥28

Steel 15-5PH (Xm-12) Standards and Specifications

AMS 5659, AMS 5862,ASTM-A564 (XM-12),BMS 7-240 (Boeing),W. Nr./EN 1.4545

Steel 15-5PH (Xm-12) Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

Steel 15-5PH Bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

Steel 15-5PH Wire

Supply in welding wire and spring wire in coil form and cut length.

Sheet & Plate

Steel 15-5PH sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.

Steel 15-5PH seamless tube & Welded pipe

Standards size and customized dimension can be produced by us with small tolerance

inconel strip,invar stirp,kovar stirp

Steel 15-5PH strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Nimonic 80A, iNCONEL 718, iNCONEL 625, incoloy 800

Steel 15-5PH Gasket/ Ring

Dimension can be customized with bright surface and precision tolerance.

Why Steel 15-5PH (Xm-12)?

• Precipitation Hardening
• High Strength
• Moderate corrosion resistance to 600°F

Steel 15-5PH (Xm-12) Application field：

• Aerospace applications
• Chemical and petrochemical applications
• Pulp and paper
• Food processing

Product detail pictures:

Related Product Guide:
electropolished
Why Nickel Based Alloys ?

We not only will try our greatest to supply outstanding services to every shopper, but also are ready to receive any suggestion offered by our buyers for OEM Supply Inconel 601 Sheet - Stainless Steel 15-5ph – Sekonic , The product will supply to all over the world, such as: Doha, Ghana, Brisbane, With the enterprising spirit of" high efficiency, convenience, practicality and innovation", and in line with such serving guidance of "good quality but better price, " and "global credit", we are striving to cooperate with the automobile parts companies all over the world to make a win-win partnership.

hastelloy bolt

Hastelloy X Sheet

Hastelly B2

Incoloy 926

Inconel 690

Inconel 825 Joint Ring

We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!

By Geraldine from Indonesia - 2017.12.19 11:10

This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.

By Marguerite from Madrid - 2018.07.27 12:26

Write your message here and send it to us