Incoloy 926 bar forging

Product Detail

Incoloy 926 bar forging,
Incoloy 926 Bar, Incoloy 926 forgings forged ring round steel, Incoloy 926 pipe,

Common Trade Names: Incoloy 926, Nickel Alloy 926, Alloy 926, Nickel 926,UNS N09926,W.Nr.1.4529

 Incoloy 926 is an austenitic stainless steel alloy, similar to 904 L alloy, with 0.2% nitrogen and 6.5% molybdenum content.Molybdenum and nitrogen content greatly increase crevice corrosion resistance.At the same time, nickel and nitrogen can not only improve the stability, but also reduce the tendency to separate the crystallization thermal process or welding process is better than the nitrogen content of nickel alloy.926 has certain corrosion resistance in chloride ions due to local corrosion properties and 25% nickel alloy content.A variety of experiments at concentrations of 10,000-70,000 PPM, pH 5-6,50 ~68℃ operating temperature, limestone desulfurization island slurry show that 926 alloy is free from crevice corrosion and pitting during the 1-2 year trial period.926 alloy also has excellent corrosion resistance in other chemical media at high temperature, high concentration media, including sulfuric acid, phosphoric acid, acid gas, sea water, salt and organic acids.In addition, in order to obtain the best corrosion resistance, ensure regular cleaning.

 

Incoloy 926 Chemical Composition

Alloy

%

Ni

Cr

Fe

c

Mn

Si

Cu

S

P

Mo

N

926

Min.

24.0

19.0

balance

-

-

   0.5  -  - 6.0 0.15

Max.

26.0

21.0

0.02

2.0

0.5

1.5 0.01 0.03 7.0 0.25

Incoloy 926 Physical Properties

Density 8.1 g/cm³
Melting point 1320-1390 ℃

Incoloy 926 Typical Mechanical Properties

Condition Tensile strength
MPa
Yield strength
MPa
Elongation
 %
Solid solution 650 295 35

Incoloy 926 Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

Incoloy 926 Bars & Rods

Round bars/Flat bars/Hex bars,     Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

Incoloy 926 Wire

Supply in welding wire and spring wire in coil form and cut length.

Sheet & Plate

Incoloy 926 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.

Incoloy 926 seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

inconel strip,invar stirp,kovar stirp

Incoloy 926 strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Fasterner & Other Fitting

Incoloy 926 Fasteners

Alloy 926  materials  in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Incoloy 926 Features:

1. It has high bell gap corrosion resistance and can be used in medium containing acid.
2. It has been proved in practice that it is effective in resisting chloride stress corrosion cracking.
3. All kinds of corrosive environment have good corrosion resistance.
4. The mechanical properties of Alloy 904 L were better than those of Alloy 904 L.

Incoloy 926 Application Field:

Incoloy 926 is a versatile data source that can be widely used in many industries:

 • Fire protection system, water purification system, Marine engineering, hydraulic pipe perfusion system Pipes, joints, air systems in acidic gases
 • Evaporators, heat exchangers, filters, agitators, etc. in phosphate production
 • Condensation and piping systems in power plants that use cold water from sewage water
 • Production of acidic chlorinated derivatives using organic catalysts.
 • the production of cellulose pulp bleaching agent
 • Marine Engineering
 • Components of flue gas desulfurization system
 • Sulfuric acid condensation and separation system
 • Crystal salt concentration and evaporator
 • Containers for transporting corrosive chemicals
 • Reverse osmosis desalting device.

Incoloy926 is a nickel-base alloy containing titanium and aluminum that contains enough chromium to form and maintain a sufficient scale of chromium oxide to protect it from high temperature conditions and to withstand higher temperatures than traditional chromium-nickel stainless steels such as 304;The higher nickel content provides better oxidation resistance than the standard 18-8 stainless, and is as resistant to oxidation as higher grades of alloys used at temperatures up to 1900 ° F (1038 ° C).
Incoloy 926 coloy 926 shall be referenced by SAE ASTM UNS KS W-NR DIN EN GB ISO SUS SUH AE AMS


  • Previous:
  • Next:

  • Write your message here and send it to us